Nokia 1800 Speaker Ere Peace Not Working Problem Solution Jumpers

Nokia 1800 cellphone Speaker Honorary Peace is not working Problem Solving Jumpers are available in this chart is posted in this post.some times we face the Nokia 1800 cellphone speaker problem in a low voice or no voice call works for some time, but speaker works not, while in other cases speaker works, but does not ring all these problems you should follow a few steps given below and the problem will be solved easily and quickly.

In the first step, whether mobile phone volume up and not too low or the setting profile.then check speaker of Nokia 1800 with one meter and as do not show continuity to modify and replace it.If speaker shows the continuity check or those items that are defined in the cellphone diagram above. Check out these links and make these jumpers as one of them is missing.in diagram top left you a color chart to determine color scheme for the chart to see.

Nokia 1800 Lcd Display Scratch Jumpers

Nokia 1800 Lcd Display Scratch Jumpers are given in bellow diagram.some time due to water damage and rust lcd points got damage and we can not sold lcd on it.or may we have lost some points of display lcd.

in above case we can scratch points that are shown in diagram with different colors and can apply jumpers on these points.right side diagram shows full board while on the left side diagram is about zoom of the original board.
so keep in mind if lcd display of nokia 1800 is not working proper and blank display white display and no display problem can be solved with this diagram easily you just should be a good mechanic and should be able to make small jumpers.

Nokia 2370 Camera Problem Solution

it is a best image to solve camera problem in nokia 2370 some times camera got hanged and standby problem then you can chceck these parts that are indicated in diagram given bellow.clean these parts that are shown in picture and resold or replace them.problem of camera in nokia 2370 will be solved.

Nokia 2730 fake charging not save battery problem solution

Nokia 2730 fake charging not save battery problem solution can be don with this diagram in it as a component is in red line you can check it clean this component and resold it if problem is not solved change the ic as indicated in picture.

Nokia X6 Charger Not Supported Not Charging Problem Ways Solution Jumpers

if we plug in the charger to the X6 and it shows error loader not supported in this particular case, the loading pin works fine, the guilt of two important things on his charger is your first step to change the charger when not charging ok.

some working time may be the reason for janiuan charger charger charger janiun problem.if supported it may be that you 47k this resistance is defined in schedules attached to this post.so remove this resistor and a new one to replace Nokia on board for change.

Nokia X6 LED LCD light problem solution jumpers ways

If the light is not workin in the X6 and LCD monitor or keyboard did not work then you can solve this problem by following these few steps that I am writing this post.

just look at the schedule given by post in there are two lines going from LCD jack check this links and also verify that all components are enlined with multi colors all these parts are used in LED lighting and LCD light function in the Nokia x6.so replacement this or parts supplied to LED Light problem and dim-lit LCD display problem in the X6.

Nokia X6 Network Problem Signal Ways Solution Jumpers

If X6 network problem or a low signal problem in your mobile solution you can do the following diagram with this post.look attached to the chart and you can see a few items in red

and the various colored lines of the components used in the network function in the Nokia x6.clean these components if there is no water damage or rust than enables the board to dry under electric light bulb for a few coins, so it can be dry or use low heat with hot air, you may need to change these parts, if not solve the problem with just cleaning and service process.

Nokia x6 power switch button ways jumpers solution problem

if charging is ok but not getting power on nokia x6 it means the power switch is not working ok so you have to change power switch button in this situation in nokia x6.if power button is damage and prints are also damage this diagram is too much useful it this condition.so make these jumpers as shown in diagram attached with this post.

for more detail and new tips and tricks about this problem keep visiting this page we will update it timely with new diagrams.some related post are also given bellow you can read them also for more information.